Fix the Challenge of a Flashing Blue Light on Your PS4 Controller

As the proud owner of a Sony PlayStation 4, you’ve probably encountered the occasional hiccup when your wireless DualShock 4 controller decides to blink a blue light at you persistently. While this can be a tad unnerving, this color-coded message is an indication that the controller may be struggling with pairing or syncing to another device, leading to an unstable or unsuccessful connection – a phenomenon widely recognized as the “Flashing Blue Light PS4” issue.

Flashing Blue Light PS4

How to Resolve Flashing Blue Light PS4?

Typically, the controller’s light bar flashes blue when it’s either disconnected from the console or facing challenges in maintaining a stable connection. This is also true if you’re using your PS4 controller to play games like Call of Duty Mobile on non-PlayStation devices such as smartphones or tablets. Here’s how to diagnose the problem:

Time needed: 2 minutes

  1. Recognizing the Connection Issue

    The persistent blue light flashing on your PS4 controller is a symptom of an unstable connection. This needs to be identified before moving to possible fixes.

  2. Restarting the Controller

    Restarting your controller is the most basic solution. This method is particularly effective when your controller’s battery is struggling to retain a charge.

  3. Resetting the Controller

    If restarting doesn’t solve the problem, resetting the controller should be your next move. This option will restore all firmware and software settings to their default state, disconnect all previously connected devices, and clear out potential bugs.

Rebooting the PS4 Controller

A straightforward resolution to this irksome problem might be simply restarting your controller. This tactic often proves to be an efficient solution. Ensure your controller has been on charge for at least 30 minutes. It should be before you attempt a restart and reconnect it to your console, phone, or tablet. This method is particularly useful if your controller’s battery life is waning. Simply press and hold the PlayStation button located between the two analog sticks for about 10 seconds to turn off the controller.

Flashing Blue Light PS4 | Reset PS4 Controller

If pressing the PlayStation button or restarting ps4 controller doesn’t yield any positive results, it’s time to resort to the next solution – resetting your controller. This procedure, akin to launching in safe mode, returns the controller’s firmware and software settings to their original states, disconnecting previously paired devices, and eradicating any bugs that might be hindering its proper functioning.

For this process, you’ll require a wooden toothpick or a bobby pin. Here’s a step-by-step guide:

  • Firstly, power off the controller.
  • Press and hold the PlayStation button for 10 seconds.
  • Press the reset button: Using your toothpick or bobby pin, push the reset button found in a tiny hole at the bottom of the left trigger. Hold this down for about 3 seconds. You may hear two beeps signaling that the reset has been successful.
  • Post-reset, check whether the flashing blue light issue persists after charging it using the USB cable for approximately 30 minutes. Additionally, you could press and hold the power button to offer the PS4 controller a soft reset.
Flashing Blue Light PS4

More from us:


Resolving the “PS4 Controller Flashing Blue” conundrum doesn’t have to be a daunting task. With the steps outlined above, you should be well on your way to restoring your gaming sessions to their former glory. However, it’s essential to understand that this is a symptom of an underlying connection issue, which can sometimes stem from hardware faults, too. So, while these solutions can offer temporary relief, a persisting problem may warrant a consultation with a professional repair service.

Frequently Asked Questions

What does the flashing blue light on a PS4 controller indicate?

The flashing blue light usually signifies that the controller is experiencing problems with syncing or pairing with a device. This will be leading to an unstable or unsuccessful connection.

How can I fix the flashing blue light issue on my PS4 controller?

You can try restarting your controller or resetting it. The resetting process will bring your controller’s firmware and software settings back to their default states, which can help solve the problem.

Why does my PS4 controller flash blue when I’m playing games on non-PlayStation devices?

The flashing blue light also occurs when the controller struggles to maintain a stable connection with non-PlayStation devices. These devices including smartphones or tablets.

What should I do if resetting my PS4 controller doesn’t fix the flashing blue light issue?

If resetting your controller doesn’t resolve the issue, you might want to try charging it using the USB cable for about 30 minutes. If the problem persists, consult with a professional repair service.

Is it normal for my PS4 controller to flash blue?

While a PS4 controller can flash blue under specific conditions, persistent blue light flashing is an indication of a connection problem. This should be addressed promptly.

Leave a Comment